Description
Fire extinguishing panel, 1 command with 4 zones in Metallic Housing.
The panel has:
One fire extinguish output monitored for open and short circuit.
• The output can operate with actuators or electro valves.
• Two cross zones for fire detectors
• One zone for a manual call point to start the extinguish procedure
• One zone for a manual call point to cancel the extinguish procedure
• Three modes of operation
• The panel has two independent siren outputs
• One contact relay for fault status
• Two fully programmable relay contacts
• Terminals to communicate with conventional fire detection panels
• Battery (12V/7Ah) is required for the operation of the panel (is not included).
Devices that can be used by a person to signify a fire alarm. They are required in every fire alarm system. In every fire alarm system a call point is located beside the main fire alarm panel and the rest near stair and exits in well distinct points that are easily accessible be people abandoning the area.
A call point used for activating fire extinguishing units and is suitable for interior use.
A call point used for activating fire extinguishing units and is suitable for interior use. It has an isolation lock.
If the lock’s key is placed in the OFF position, the call point event if it is activated, does not activate the fire extinguishing unit.
